Recherche de site Web

Configuration de Zimbra Collaboration Suite (ZCS) sur RHEL/CentOS 7/8


Zimbra Collaboration Suite (ZCS) est une plateforme collaborative Open Source pour serveurs de messagerie, développée en deux éditions, édition Open Source ( Gratuit) et Network Edition (Payant), qui fournit des services tels que LDAP, SMTP, POP et IMAP, client de messagerie Web, calendrier, tâches, antivirus, antispam et d'autres.

Ce didacticiel décrit comment installer Zimbra Collaboration Suite Open Source Edition sur un serveur CentOS/RHEL 7.

Exigences

  • Un serveur DNS externe avec des enregistrements valides A et MX pour pointer vers l'adresse IP de votre serveur de messagerie Zimbra.
  • Une installation minimale propre de CentOS 8/RHEL 8 ou CentOS 7/RHEL 7 sans aucun serveur de messagerie, de bases de données, LDAP, DNS ou HTTP opérationnel.
  • Une adresse IP statique attribuée à une interface réseau.

Étape 1 : Installer les packages système

1. Avant de procéder au processus d'installation de Zimbra Collaboration Suite, connectez-vous d'abord à la console de votre serveur avec les privilèges root et installez les packages suivants :

yum -y install unzip net-tools sysstat openssh-clients perl-core libaio nmap-ncat libstdc++.so.6

2. Ensuite, exécutez la commande getenforce pour vérifier si Selinux est activé sur votre machine. Si la stratégie est définie sur Enforced, désactivez-la en exécutant les commandes ci-dessous :

getenforce
setenforce 0
getenforce

Pour désactiver complètement Selinux sur CentOS, ouvrez le fichier /etc/selinux/config avec un éditeur de texte et définissez la ligne SELINUX sur disabled.

3. Assurez-vous que l'utilitaire système wget est également installé sur votre système en exécutant la commande suivante :

yum install wget 

Étape 2 : configurer le nom d'hôte du système

4. Pour que Zimbra fonctionne correctement, vous devez définir le nom d'hôte et le FQDN de la machine locale pour qu'ils pointent vers l'adresse IP de votre serveur en exécutant la commande ci-dessous. Commandes hostnamectl du compte root :

hostnamectl set-hostname mail
echo "192.168.0.14  mail.centos7.lan  mail " >> /etc/hosts
cat /etc/hosts

Remplacez le nom d'hôte du système et les valeurs FQDN en conséquence afin de correspondre à vos propres paramètres de domaine. Testez les valeurs du nom d'hôte et du nom de domaine complet en émettant la commande ping sur les deux enregistrements.

ping -c1 mail.centos7.lan
ping -c1 mail

Étape 3 : Ajouter une adresse IP statique

5. Si votre serveur utilise une adresse IP dynamique DHCP, vous devez alors modifier votre carte d'interface réseau et la configurer pour utiliser une adresse IP statique. Obtenez les informations sur l'interface réseau à l'aide de la commande ip addr et identifiez la carte réseau externe de votre serveur (généralement quelque chose comme enp0s3 ou eth0).

ip addr

Ensuite, exécutez la commande nmtui-edit sur l'interface dont vous avez besoin pour modifier les paramètres et attribuez à l'interface une adresse IP manuelle. Utilisez les captures d'écran ci-dessous comme guide.

nmtui-edit enp0s3

Étape 4 : Désactiver les services indésirables

6. Une installation par défaut de CentOS est livrée avec le démon postfix déjà installé et en cours d'exécution. Pour désactiver et effacer le service Postfix, exécutez les commandes suivantes :

systemctl stop postfix
systemctl disable postfix
yum remove postfix

Une fois le service supprimé, exécutez la commande ss afin de vérifier si d'autres démons incompatibles avec le service Zimbra, tels que LDAP, httpd, dovecot, sont en cours d'exécution sur votre système. Si tel est le cas, supprimez-les également.

Étape 5 : Installer l'édition Open Source de Zimbra Collaboration Suite

7. Il est maintenant temps d'installer Zimbra Collaboration Suite. Accédez à la page de téléchargement de Zimbra Collaboration Suite et récupérez la dernière version sur votre système en exécutant la commande wget suivante :

----------------- For RHEL/CentOS 8 -----------------
wget https://files.zimbra.com/downloads/8.8.15_GA/zcs-8.8.15_GA_3953.RHEL8_64.20200629025823.tgz

----------------- For RHEL/CentOS 7 -----------------
wget https://files.zimbra.com/downloads/8.8.15_GA/zcs-8.8.15_GA_3869.RHEL7_64.20190918004220.tgz

----------------- For RHEL/CentOS 6 -----------------
wget https://files.zimbra.com/downloads/8.8.15_GA/zcs-8.8.15_GA_3869.RHEL6_64.20190918004220.tgz

8. Une fois le téléchargement terminé, utilisez la commande unzip pour extraire l'archive, entrez dans le répertoire extrait de Zimbra et répertoriez le contenu du répertoire pour localiser le fichier d'installation.

tar xfz zcs-8.8.15_GA_3953.RHEL8_64.20200629025823.tgz
cd zcs-8.8.15_GA_3953.RHEL8_64.20200629025823/
ls

9. Maintenant, démarrez le processus d'installation de Zimbra en lançant en exécution le fichier script d'installation nommé install.sh.

Après une série de vérifications du système, le programme d'installation vous demandera d'accepter la licence. Acceptez la licence (y) afin de poursuivre le processus d'installation.

./install.sh
OR
./install.sh --platform-override   [On different platforms other than RHEL]
Exemple de sortie
Operations logged to /tmp/install.log.92OcKO6s
Checking for existing installation...
    zimbra-drive...NOT FOUND
    zimbra-imapd...NOT FOUND
    zimbra-patch...NOT FOUND
    zimbra-mta-patch...NOT FOUND
    zimbra-proxy-patch...NOT FOUND
    zimbra-license-tools...NOT FOUND
    zimbra-license-extension...NOT FOUND
    zimbra-network-store...NOT FOUND
    zimbra-network-modules-ng...NOT FOUND
    zimbra-chat...NOT FOUND
    zimbra-talk...NOT FOUND
    zimbra-ldap...NOT FOUND
    zimbra-logger...NOT FOUND
    zimbra-mta...NOT FOUND
    zimbra-dnscache...NOT FOUND
    zimbra-snmp...NOT FOUND
    zimbra-store...NOT FOUND
    zimbra-apache...NOT FOUND
    zimbra-spell...NOT FOUND
    zimbra-convertd...NOT FOUND
    zimbra-memcached...NOT FOUND
    zimbra-proxy...NOT FOUND
    zimbra-archiving...NOT FOUND
    zimbra-core...NOT FOUND


----------------------------------------------------------------------
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE.
SYNACOR, INC. ("SYNACOR") WILL ONLY LICENSE THIS SOFTWARE TO YOU IF YOU
FIRST ACCEPT THE TERMS OF THIS AGREEMENT. BY DOWNLOADING OR INSTALLING
THE SOFTWARE, OR USING THE PRODUCT, YOU ARE CONSENTING TO BE BOUND BY
THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS
AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL OR USE THE PRODUCT.

License Terms for this Zimbra Collaboration Suite Software:
https://www.zimbra.com/license/zimbra-public-eula-2-6.html
----------------------------------------------------------------------



Do you agree with the terms of the software license agreement? [N] y

10. Ensuite, le processus d'installation vous posera une série de questions afin de configurer correctement le démon Zimbra. Utilisez l'extrait d'installation ci-dessous afin de configurer davantage le service Zimbra.

Use Zimbra's package repository [Y] y

Importing Zimbra GPG key

Configuring package repository

Checking for installable packages

Found zimbra-core (local)
Found zimbra-ldap (local)
Found zimbra-logger (local)
Found zimbra-mta (local)
Found zimbra-dnscache (local)
Found zimbra-snmp (local)
Found zimbra-store (local)
Found zimbra-apache (local)
Found zimbra-spell (local)
Found zimbra-memcached (repo)
Found zimbra-proxy (local)
Found zimbra-drive (repo)
Found zimbra-imapd (local)
Found zimbra-patch (repo)
Found zimbra-mta-patch (repo)
Found zimbra-proxy-patch (repo)


Select the packages to install

Install zimbra-ldap [Y] y

11. Ensuite, il vous demandera d'installer les packages Zimbra, appuyez sur Y pour tous les installer.

Select the packages to install

Install zimbra-ldap [Y] y Install zimbra-logger [Y] y Install zimbra-mta [Y] y Install zimbra-dnscache [Y] y Install zimbra-snmp [Y] y Install zimbra-store [Y] y Install zimbra-apache [Y] y Install zimbra-spell [Y] y Install zimbra-memcached [Y] y Install zimbra-proxy [Y] y Checking required space for zimbra-core Checking space for zimbra-store Checking required packages for zimbra-store zimbra-store package check complete. Installing: zimbra-core zimbra-ldap zimbra-logger zimbra-mta zimbra-dnscache zimbra-snmp zimbra-store zimbra-apache zimbra-spell zimbra-memcached zimbra-proxy zimbra-drive zimbra-imapd zimbra-patch zimbra-mta-patch zimbra-proxy-patch zimbra-chat

12. Enfin, le processus d'installation de Zimbra démarrera.

The system will be modified.  Continue? [N] y

Beginning Installation - see /tmp/install.log.92OcKO6s for details...

                          zimbra-core-components will be downloaded and installed.
                          zimbra-common-core-jar will be installed.
                         zimbra-common-core-libs will be installed.
                         zimbra-common-mbox-conf will be installed.
                   zimbra-common-mbox-conf-attrs will be installed.
                    zimbra-common-mbox-conf-msgs will be installed.
                  zimbra-common-mbox-conf-rights will be installed.
                           zimbra-common-mbox-db will be installed.
                         zimbra-common-mbox-docs will be installed.
                   zimbra-common-mbox-native-lib will be installed.
                            zimbra-timezone-data will be installed.
                                     zimbra-core will be installed.
                          zimbra-ldap-components will be downloaded and installed.
                                     zimbra-ldap will be installed.
                                   zimbra-logger will be installed.
                           zimbra-mta-components will be downloaded and installed.
                                      zimbra-mta will be installed.
                      zimbra-dnscache-components will be downloaded and installed.
                                 zimbra-dnscache will be installed.
                          zimbra-snmp-components will be downloaded and installed.
                                     zimbra-snmp will be installed.
Last metadata expiration check: 0:00:56 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                       zimbra-jetty-distribution will be downloaded and installed.
                         zimbra-store-components will be downloaded and installed.
                   zimbra-mbox-admin-console-war will be installed.
                                zimbra-mbox-conf will be installed.
                                 zimbra-mbox-war will be installed.
                             zimbra-mbox-service will be installed.
                          zimbra-mbox-store-libs will be installed.
                       zimbra-mbox-webclient-war will be installed.
                                    zimbra-store will be installed.
                        zimbra-apache-components will be downloaded and installed.
                                   zimbra-apache will be installed.
                         zimbra-spell-components will be downloaded and installed.
                                    zimbra-spell will be installed.
Last metadata expiration check: 0:01:07 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                                zimbra-memcached will be downloaded and installed.
                         zimbra-proxy-components will be downloaded and installed.
                                    zimbra-proxy will be installed.
Last metadata expiration check: 0:01:18 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                                    zimbra-drive will be downloaded and installed (later).
                                    zimbra-imapd will be installed.
Last metadata expiration check: 0:01:20 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                                    zimbra-patch will be downloaded and installed (later).
Last metadata expiration check: 0:01:22 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                                zimbra-mta-patch will be downloaded and installed (later).
Last metadata expiration check: 0:01:23 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                              zimbra-proxy-patch will be downloaded and installed (later).
Last metadata expiration check: 0:01:27 ago on Sat 01 Aug 2020 01:56:00 AM EDT.
                                     zimbra-chat will be downloaded and installed (later).

Downloading packages (11):
   zimbra-core-components
   zimbra-ldap-components
   zimbra-mta-components
   zimbra-dnscache-components
   zimbra-snmp-components
   zimbra-jetty-distribution
   zimbra-store-components
   zimbra-apache-components
   zimbra-spell-components
   zimbra-memcached
   zimbra-proxy-components
      ...done

Removing /opt/zimbra
Removing zimbra crontab entry...done.
Cleaning up zimbra init scripts...done.
Cleaning up /etc/security/limits.conf...done.

Finished removing Zimbra Collaboration Server.


Installing repo packages (11):
   zimbra-core-components
   zimbra-ldap-components
   zimbra-mta-components
   zimbra-dnscache-components
   zimbra-snmp-components
   zimbra-jetty-distribution
   zimbra-store-components
   zimbra-apache-components
   zimbra-spell-components
   zimbra-memcached
   zimbra-proxy-components
      ...

13. Configuration du magasin.

1) Status:                                  Enabled
   2) Create Admin User:                       yes
   3) Admin user to create:                    [email 
** 4) Admin Password                           UNSET
   5) Anti-virus quarantine user:              [email 
   6) Enable automated spam training:          yes
   7) Spam training user:                      [email 
   8) Non-spam(Ham) training user:             [email 
   9) SMTP host:                               mail.centos7.lan
  10) Web server HTTP port:                    8080
  11) Web server HTTPS port:                   8443
  12) Web server mode:                         https
  13) IMAP server port:                        7143
  14) IMAP server SSL port:                    7993
  15) POP server port:                         7110
  16) POP server SSL port:                     7995
  17) Use spell check server:                  yes
  18) Spell server URL:                        http://mail.centos7.lan:7780/aspell.php
  19) Enable version update checks:            TRUE
  20) Enable version update notifications:     TRUE
  21) Version update notification email:       [email 
  22) Version update source email:             [email 
  23) Install mailstore (service webapp):      yes
  24) Install UI (zimbra,zimbraAdmin webapps): yes

Select, or 'r' for previous menu [r] 4 # Select 4 to set admin password Password for [email  (min 6 characters): [54mE0RmqN] enter admin password here
Store configuration

   1) Status:                                  Enabled
   2) Create Admin User:                       yes
   3) Admin user to create:                    [email 
   4) Admin Password                           set
   5) Anti-virus quarantine user:              [email 
   6) Enable automated spam training:          yes
   7) Spam training user:                      [email 
   8) Non-spam(Ham) training user:             [email 
   9) SMTP host:                               mail.centos7.lan
  10) Web server HTTP port:                    8080
  11) Web server HTTPS port:                   8443
  12) Web server mode:                         https
  13) IMAP server port:                        7143
  14) IMAP server SSL port:                    7993
  15) POP server port:                         7110
  16) POP server SSL port:                     7995
  17) Use spell check server:                  yes
  18) Spell server URL:                        http://mail.centos7.lan:7780/aspell.php
  19) Enable version update checks:            TRUE
  20) Enable version update notifications:     TRUE
  21) Version update notification email:       [email 
  22) Version update source email:             [email 
  23) Install mailstore (service webapp):      yes
  24) Install UI (zimbra,zimbraAdmin webapps): yes

Select, or 'r' for previous menu [r] r
Main menu

   1) Common Configuration:
   2) zimbra-ldap:                             Enabled
   3) zimbra-logger:                           Enabled
   4) zimbra-mta:                              Enabled
   5) zimbra-dnscache:                         Enabled
   6) zimbra-snmp:                             Enabled
   7) zimbra-store:                            Enabled
   8) zimbra-spell:                            Enabled
   9) zimbra-proxy:                            Enabled
  10) Default Class of Service Configuration:
   s) Save config to file
   x) Expand menu
   q) Quit

*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) a  # Apply configuration Save configuration data to a file? [Yes] Enter Save config in file: [/opt/zimbra/config.11047] Saving config in /opt/zimbra/config.11047...done. The system will be modified - continue? [No] yes Operations logged to /tmp/zmsetup01262016-002704.log Setting local config values...done. Initializing core config...Setting up CA...done. Deploying CA to /opt/zimbra/conf/ca ...done. Creating SSL zimbra-store certificate...done. Creating new zimbra-ldap SSL certificate...done. Creating new zimbra-mta SSL certificate...done. Creating new zimbra-proxy SSL certificate...done. Installing mailboxd SSL certificates...done. Installing MTA SSL certificates...done. Installing LDAP SSL certificate...done. Installing Proxy SSL certificate...done. Initializing ldap...done. Setting replication password...done. Setting Postfix password...done. Setting amavis password...done. Setting nginx password...done. Setting BES searcher password...done. Creating server entry for mail.centos7.lan...done. Setting Zimbra IP Mode...done. Saving CA in ldap ...done. Saving SSL Certificate in ldap ...done. Setting spell check URL...done. Setting service ports on mail.centos7.lan...done. Setting zimbraFeatureTasksEnabled=TRUE...done. Setting zimbraFeatureBriefcasesEnabled=TRUE...done. Setting Master DNS IP address(es)...done. Setting DNS cache tcp lookup preference...done. Setting DNS cache udp lookup preference...done. Setting DNS tcp upstream preference...done. Setting TimeZone Preference...done. Initializing mta config...done. Setting services on mail.centos7.lan...done. Adding mail.centos7.lan to zimbraMailHostPool in default COS...done. Creating domain mail.centos7.lan...done. Setting default domain name...done. Creating domain mail.centos7.lan...already exists. Creating admin account [email . Creating root alias...done. Creating postmaster alias...done. Creating user [email . Creating user [email . Creating user [email . Setting spam training and Anti-virus quarantine accounts...done. Initializing store sql database...done. Setting zimbraSmtpHostname for mail.centos7.lan...done. Configuring SNMP...done. Setting up syslog.conf...done. Starting servers...done. Installing common zimlets... com_zimbra_adminversioncheck...done. com_zimbra_attachcontacts...done. com_zimbra_attachmail...done. com_zimbra_bulkprovision...done. com_zimbra_cert_manager...done. com_zimbra_clientuploader...done. com_zimbra_date...done. com_zimbra_email...done. com_zimbra_mailarchive...done. com_zimbra_phone...done. com_zimbra_proxy_config...done. com_zimbra_srchhighlighter...done. com_zimbra_tooltip...done. com_zimbra_url...done. com_zimbra_viewmail...done. com_zimbra_webex...done. com_zimbra_ymemoticons...done. Finished installing common zimlets. Restarting mailboxd...done. Creating galsync account for default domain...done. You have the option of notifying Zimbra of your installation. This helps us to track the uptake of the Zimbra Collaboration Server. The only information that will be transmitted is: The VERSION of zcs installed (8.6.0_GA_1153_RHEL7_64) The ADMIN EMAIL ADDRESS created ([email ) Notify Zimbra of your installation? [Yes] no Notification skipped Setting up zimbra crontab...done. Moving /tmp/zmsetup01262016-002704.log to /opt/zimbra/log Configuration complete - press return to exit # Press Enter

Étape 6 : Configuration initiale de Zimba

14. Une fois l'installation terminée, ouvrez un navigateur Web et accédez à votre nom de domaine ou à l'adresse IP de la machine exécutant le service Zimbra, sur le port 7071 via le protocole HTTPS, acceptez le erreur de sécurité du certificat et connectez-vous avec les informations d'identification configurées lors du processus d'installation. Le nom d'utilisateur par défaut du panneau Web Zimbra Admin est admin.

https://mail.centos7.lan:7071
or
https://192.168.1.14:7071 

15. Une fois connecté à la console Web d'administration, vous pouvez commencer à ajouter vos propres certificats SSL, créer des comptes de messagerie, des alias de messagerie, etc. N'oubliez pas que le port 7071 est utilisé uniquement pour les tâches administratives.

Les clients peuvent se connecter en toute sécurité à leurs boîtes de messagerie Web en utilisant le nom de domaine ou l'adresse IP du serveur via le protocole HTTPS.

https://mail.centos7.lan 
or
https://192.168.1.14 

Toutes nos félicitations! Vous disposez désormais d’une pile de courrier entièrement opérationnelle installée dans vos locaux.

Étape 6 : Supprimer ou désinstaller Zimbra

Si vous souhaitez désinstaller le service Zimbra ainsi que ses composants, exécutez le script d'installation avec l'option -u.

./install.sh -u

Pour supprimer l'archive et le répertoire d'installation de Zimbra, exécutez les commandes ci-dessous :

cd
rm -rf zcs-*

Enfin, pour exécuter correctement Zimbra Collaboration Suite, vous avez besoin d'une machine puissante avec un minimum de 4 Go de RAM.


Tous les droits sont réservés. © Linux-Console.net • 2019-2024